diff --git a/P_control_Code/P_control_Code.ino b/P_control_Code/P_control_Code.ino new file mode 100644 index 0000000..dd3ff00 --- /dev/null +++ b/P_control_Code/P_control_Code.ino @@ -0,0 +1,315 @@ +// I2C device class (I2Cdev) demonstration Arduino sketch for MPU6050 class using DMP (MotionApps v2.0) +// 6/21/2012 by Jeff Rowberg +// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib +// +// Changelog: +// 2019-07-08 - Added Auto Calibration and offset generator +// - and altered FIFO retrieval sequence to avoid using blocking code +// 2016-04-18 - Eliminated a potential infinite loop +// 2013-05-08 - added seamless Fastwire support +// - added note about gyro calibration +// 2012-06-21 - added note about Arduino 1.0.1 + Leonardo compatibility error +// 2012-06-20 - improved FIFO overflow handling and simplified read process +// 2012-06-19 - completely rearranged DMP initialization code and simplification +// 2012-06-13 - pull gyro and accel data from FIFO packet instead of reading directly +// 2012-06-09 - fix broken FIFO read sequence and change interrupt detection to RISING +// 2012-06-05 - add gravity-compensated initial reference frame acceleration output +// - add 3D math helper file to DMP6 example sketch +// - add Euler output and Yaw/Pitch/Roll output formats +// 2012-06-04 - remove accel offset clearing for better results (thanks Sungon Lee) +// 2012-06-01 - fixed gyro sensitivity to be 2000 deg/sec instead of 250 +// 2012-05-30 - basic DMP initialization working + +/* ============================================ +I2Cdev device library code is placed under the MIT license +Copyright (c) 2012 Jeff Rowberg + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. +=============================================== +*/ + +// I2Cdev and MPU6050 must be installed as libraries, or else the .cpp/.h files +// for both classes must be in the include path of your project +#include "I2Cdev.h" +#include +#include "MPU6050_6Axis_MotionApps20.h" +//#include "MPU6050.h" // not necessary if using MotionApps include file + +// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation +// is used in I2Cdev.h +#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE + #include "Wire.h" +#endif + +// class default I2C address is 0x68 +// specific I2C addresses may be passed as a parameter here +// AD0 low = 0x68 (default for SparkFun breakout and InvenSense evaluation board) +// AD0 high = 0x69 +//MPU6050 mpu; +MPU6050 mpu(0x69); // <-- use for AD0 high + +/* ========================================================================= + NOTE: In addition to connection 3.3v, GND, SDA, and SCL, this sketch + depends on the MPU-6050's INT pin being connected to the Arduino's + external interrupt #0 pin. On the Arduino Uno and Mega 2560, this is + digital I/O pin 2. + * ========================================================================= */ + +/* ========================================================================= + NOTE: Arduino v1.0.1 with the Leonardo board generates a compile error + when using Serial.write(buf, len). The Teapot output uses this method. + The solution requires a modification to the Arduino USBAPI.h file, which + is fortunately simple, but annoying. This will be fixed in the next IDE + release. For more info, see these links: + + http://arduino.cc/forum/index.php/topic,109987.0.html + http://code.google.com/p/arduino/issues/detail?id=958 + * ========================================================================= */ + + + + +//pid stuff + +double tic = millis(); +double goal = 0.0; +double kp = 1; +double ki = 1; +double kd = 1; + +double properr = goal - 0.0; +double interr = 0.0; +double dererr = 0.0; + + +double toc = millis(); + +Servo myservo; + + + +// uncomment "OUTPUT_READABLE_QUATERNION" if you want to see the actual +// quaternion components in a [w, x, y, z] format (not best for parsing +// on a remote host such as Processing or something though) +//#define OUTPUT_READABLE_QUATERNION + +// uncomment "OUTPUT_READABLE_EULER" if you want to see Euler angles +// (in degrees) calculated from the quaternions coming from the FIFO. +// Note that Euler angles suffer from gimbal lock (for more info, see +// http://en.wikipedia.org/wiki/Gimbal_lock) +//#define OUTPUT_READABLE_EULER + +// uncomment "OUTPUT_READABLE_YAWPITCHROLL" if you want to see the yaw/ +// pitch/roll angles (in degrees) calculated from the quaternions coming +// from the FIFO. Note this also requires gravity vector calculations. +// Also note that yaw/pitch/roll angles suffer from gimbal lock (for +// more info, see: http://en.wikipedia.org/wiki/Gimbal_lock) +#define OUTPUT_READABLE_YAWPITCHROLL + +// uncomment "OUTPUT_READABLE_REALACCEL" if you want to see acceleration +// components with gravity removed. This acceleration reference frame is +// not compensated for orientation, so +X is always +X according to the +// sensor, just without the effects of gravity. If you want acceleration +// compensated for orientation, us OUTPUT_READABLE_WORLDACCEL instead. +//#define OUTPUT_READABLE_REALACCEL + +// uncomment "OUTPUT_READABLE_WORLDACCEL" if you want to see acceleration +// components with gravity removed and adjusted for the world frame of +// reference (yaw is relative to initial orientation, since no magnetometer +// is present in this case). Could be quite handy in some cases. +//#define OUTPUT_READABLE_WORLDACCEL + +// uncomment "OUTPUT_TEAPOT" if you want output that matches the +// format used for the InvenSense teapot demo +//#define OUTPUT_TEAPOT + + + +#define INTERRUPT_PIN 2 // use pin 2 on Arduino Uno & most boards +#define LED_PIN 13 // (Arduino is 13, Teensy is 11, Teensy++ is 6) +bool blinkState = false; + +// MPU control/status vars +bool dmpReady = false; // set true if DMP init was successful +uint8_t mpuIntStatus; // holds actual interrupt status byte from MPU +uint8_t devStatus; // return status after each device operation (0 = success, !0 = error) +uint16_t packetSize; // expected DMP packet size (default is 42 bytes) +uint16_t fifoCount; // count of all bytes currently in FIFO +uint8_t fifoBuffer[64]; // FIFO storage buffer + +// orientation/motion vars +Quaternion q; // [w, x, y, z] quaternion container +VectorInt16 aa; // [x, y, z] accel sensor measurements +VectorInt16 aaReal; // [x, y, z] gravity-free accel sensor measurements +VectorInt16 aaWorld; // [x, y, z] world-frame accel sensor measurements +VectorFloat gravity; // [x, y, z] gravity vector +float euler[3]; // [psi, theta, phi] Euler angle container +float ypr[3]; // [yaw, pitch, roll] yaw/pitch/roll container and gravity vector + +// packet structure for InvenSense teapot demo +uint8_t teapotPacket[14] = { '$', 0x02, 0,0, 0,0, 0,0, 0,0, 0x00, 0x00, '\r', '\n' }; + + + +// ================================================================ +// === INTERRUPT DETECTION ROUTINE === +// ================================================================ + +volatile bool mpuInterrupt = false; // indicates whether MPU interrupt pin has gone high +void dmpDataReady() { + mpuInterrupt = true; +} + + + +// ================================================================ +// === INITIAL SETUP === +// ================================================================ + +void setup() { + + +myservo.attach(3); + // join I2C bus (I2Cdev library doesn't do this automatically) + #if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE + Wire.begin(); + Wire.setClock(400000); // 400kHz I2C clock. Comment this line if having compilation difficulties + #elif I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE + Fastwire::setup(400, true); + #endif + + // initialize serial communication + // (115200 chosen because it is required for Teapot Demo output, but it's + // really up to you depending on your project) + Serial.begin(115200); + while (!Serial); // wait for Leonardo enumeration, others continue immediately + + // NOTE: 8MHz or slower host processors, like the Teensy @ 3.3V or Arduino + // Pro Mini running at 3.3V, cannot handle this baud rate reliably due to + // the baud timing being too misaligned with processor ticks. You must use + // 38400 or slower in these cases, or use some kind of external separate + // crystal solution for the UART timer. + + // initialize device + Serial.println(F("Initializing I2C devices...")); + mpu.initialize(); + pinMode(INTERRUPT_PIN, INPUT); + + // verify connection + Serial.println(F("Testing device connections...")); + Serial.println(mpu.testConnection() ? F("MPU6050 connection successful") : F("MPU6050 connection failed")); + + // wait for ready + Serial.println(F("\nSend any character to begin DMP programming and demo: ")); + while (Serial.available() && Serial.read()); // empty buffer + while (!Serial.available()); // wait for data + while (Serial.available() && Serial.read()); // empty buffer again + + // load and configure the DMP + Serial.println(F("Initializing DMP...")); + devStatus = mpu.dmpInitialize(); + + // supply your own gyro offsets here, scaled for min sensitivity + mpu.setXGyroOffset(220); + mpu.setYGyroOffset(76); + mpu.setZGyroOffset(-85); + mpu.setZAccelOffset(1788); // 1688 factory default for my test chip + + // make sure it worked (returns 0 if so) + if (devStatus == 0) { + // Calibration Time: generate offsets and calibrate our MPU6050 + mpu.CalibrateAccel(6); + mpu.CalibrateGyro(6); + mpu.PrintActiveOffsets(); + // turn on the DMP, now that it's ready + Serial.println(F("Enabling DMP...")); + mpu.setDMPEnabled(true); + + // enable Arduino interrupt detection + Serial.print(F("Enabling interrupt detection (Arduino external interrupt ")); + Serial.print(digitalPinToInterrupt(INTERRUPT_PIN)); + Serial.println(F(")...")); + attachInterrupt(digitalPinToInterrupt(INTERRUPT_PIN), dmpDataReady, RISING); + mpuIntStatus = mpu.getIntStatus(); + + // set our DMP Ready flag so the main loop() function knows it's okay to use it + Serial.println(F("DMP ready! Waiting for first interrupt...")); + dmpReady = true; + + // get expected DMP packet size for later comparison + packetSize = mpu.dmpGetFIFOPacketSize(); + } else { + // ERROR! + // 1 = initial memory load failed + // 2 = DMP configuration updates failed + // (if it's going to break, usually the code will be 1) + Serial.print(F("DMP Initialization failed (code ")); + Serial.print(devStatus); + Serial.println(F(")")); + } + + // configure LED for output + pinMode(LED_PIN, OUTPUT); +} + + + +// ================================================================ +// === MAIN PROGRAM LOOP === +// ================================================================ + +void loop() { + tic = toc; + // if programming failed, don't try to do anything + if (!dmpReady) return; + // read a packet from FIFO + if (mpu.dmpGetCurrentFIFOPacket(fifoBuffer)) { // Get the Latest packet + + + #ifdef OUTPUT_READABLE_YAWPITCHROLL + // display Euler angles in degrees + mpu.dmpGetQuaternion(&q, fifoBuffer); + mpu.dmpGetGravity(&gravity, &q); + mpu.dmpGetYawPitchRoll(ypr, &q, &gravity); + //Serial.print("ypr\t"); + Serial.print(ypr[0] * 180/M_PI); + Serial.print("\t"); + //Serial.print(ypr[1] * 180/M_PI); + //Serial.print("\t"); + //Serial.println(ypr[2] * 180/M_PI); + + + toc = millis(); + //dererr = (properr - (goal-ypr[0]))/(toc-tic); + properr = goal-ypr[0]; + //interr += properr * (toc-tic); + Serial.println(properr*kp); + + int servoVal = map(properr * kp, -3.15 * kp, 3.15 * kp, 1000, 2000); + myservo.writeMicroseconds(servoVal); + + + + #endif + + // blink LED to indicate activity + blinkState = !blinkState; + digitalWrite(LED_PIN, blinkState); + } +}