diff --git a/simulation/controllers/olympian/standingBalance.py b/simulation/controllers/olympian/standingBalance.py
new file mode 100644
index 0000000..1eb5023
--- /dev/null
+++ b/simulation/controllers/olympian/standingBalance.py
@@ -0,0 +1,93 @@
+"""Olympian Controller"""
+
+# You may need to import some classes of the controller module. Ex:
+#  from controller import Robot, Motor, DistanceSensor
+from controller import Robot, Accelerometer, Gyro
+
+def integral(error, priorIntegral):
+  global timestep
+  return priorIntegral + error * timestep
+
+def derivative(error, priorError):
+  global timestep
+  return (error-priorError)/timestep
+
+def actuatorMovement(robot, pidOutput):
+  #Inverse Kinematic Equation
+  continue
+
+def controllerPID(robot, error, priorError, priorIntegral):
+  # Constant values we change to try to optimize
+  # Kp is relevant for dominant response of system
+  # Ki brings memory into the system
+  # Kd responsible for the rate of change of this controller
+  Kp = 1
+  Ki = 0
+  Kd = 0
+
+  #Usually not needed, but just in case we ever need nonstop motion
+  xBias = 0
+  yBias = 0
+
+  derivativeX = derivative(error[0], priorError[0])
+  derivativeY = derivative(error[1], priorError[1])
+  integralX = integral(error[0], priorIntegral[0])
+  integralY = integral(error[1], priorIntegral[1])
+
+  ux = Kp*error[0] + Ki * integralX + Kd * derivativeX + xBias
+  uy = Kp*error[1] + Ki * integralY + Kd * derivativeY + yBias
+
+  priorError = error
+  priorIntegral = [integralX, integralY]
+
+  actuatorMovement(robot, [ux, uy])
+
+
+def calculateZMP(gyro, accel):
+  # [x,y,z] data -- assuming placed at CoM
+  gData = gyro.getValues()
+  aData = gyro.getValues()
+
+  CoM_height = 1 # some constant value for CoM Height from Ground
+  gravity = 9.81
+
+  xObs = -CoM_height/gravity * aData[0]
+  yObs = -CoM_height/gravity * aData[1]
+
+  return xObs, yObs
+
+def calculateCOM(robot):
+  continue
+
+def main():
+  print("Initializing Olympiad...")
+  robot = Robot()
+  
+  # get the time step of the current world.
+  global timestep
+  timestep = int(robot.getBasicTimeStep())
+  
+  # gyroscope, accelorometer
+  gyro = robot.getDevice("gyro.wbt name")
+  accel = robot.getDevice("accel .wbt name")
+
+  gyro.enable(TIMESTEP)
+  accel.enable(TIMESTEP)
+
+  # If the ZMP is stable then there will be no trajectory
+  # Assumes that the base-frame-origin is in between the two feet since it's standing
+  # This stays under the x and y coor of the COM (assuming standing straight)
+  desiredXZMP = 0
+  desiredYZMP = 0
+
+  priorError = [0,0]
+  priorIntegral = [0, 0]
+
+  while robot.step(timestep) != -1:
+    xObs, yObs = calculateZMP(gyro, accel)
+    error = [desiredXZMP-xObs, desiredYZMP-yObs]
+    controllerPID(robot, error, priorError, priorIntegral)
+
+
+if __name__ == '__main__':
+    main()
\ No newline at end of file